|
|
Build Your Online Product Catalogs?
| Product Name: |
Nitrocellulose Wood Lacquer
|
| Supply Ability: |
60000tons |
| Related proudcts |
wood paint, wood lacquer, furniture lacquer, |
| Specifications |
M8100/M8300/M8500 |
| Price Term: |
FOB,CNF,CIF,others |
| Port of loading: |
Foshan,Shenzhen |
| Minimum Order |
1 ton |
| Unit Price: |
USD 1~50/tin |
|
Maydos nitrocellulose based wood varnish(lacquer) is developed for many usages over any wood.It it suitable for inerior wood furniture,bamboo or cane products and it can show a clear crystal appearance with different sheen. Pure quality of materials without foreign particles ensures the performance of decoration.
Specifications/Technical Index/Main Composition:
Resin/Binder type: Nitrocellulose
Theoretical cverage: 12~14 sqm/kg/coat
Drying: (25℃,relative humidity:75%): touch dry:20 minutes; hard dry:8 hours
Application tools: Brush, Spray gun
Storage: Always store in a cool,dry and well ventilated place.
Packing: 5kg 9kg(set pack) or 1L, 2L , 3L,4L,18L and 200L
Shelf Life: 12 months(use up in 4 hours after mixing)
Features/ Advantages:
1,hardeners not needed to ensure your health;
2,Special yellowing resistant formula which preserves gloss;
3,Fast surface drying speed which saves labor and time;
4,Good leveling character,easy application and repair.
Standard&Certificates: International Standard
ISO14025 Ecolabelling certificate, ISO9001 and ISO14001
Usage:
This product is suitable for wooden surfaces of various kinds of wood works like furniture,bed,desk,chair,etc.
Instructions/application recommendation of painting system:
1,make sure all the surfaces are clean,dry and free from wax,grese,oil,etc;
2,For bare wood,sand it down in the direction of the grain until it¡¯s smooth.Start with 80# sandpaper,and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3,If you are using paint as the topcoat over another finish,sand the existing finish first with steel wool or synthetic steel wool.
4,Apply a thin coat of paint on the wood and allow it to dry completely.After the first coat is dry,sand it lightly with fine abrasive paper to remove any raised grain.
5,Brush or spray another coat of paint and allow it to dry.
6,Continue to apply coats of paint until you achieve the surface build-up that you desire.
7,Check the finish to see whether there are small nicks |
| Company: |
Guangdong Maydos Building Materials Limited Co***ny
|
| Contact: |
Mr. Kevin Hu |
| Address: |
Sanzhou Industrial Zone, Lunjiao, Shunde District |
| Postcode: |
528308 |
| Tel: |
86 757 27339931 |
| Fax: |
86 757 27339097 |
| E-mail: |
|
|
|
|
Home
